|
|
|
|
SPECIALTY RULERS
CLICK ON THUMBNAILS TO VIEW
LARGER PICTURE |
|
CUFF RULERS
Calibrated in inches, in 8ths on the top edge and in 16ths on
the bottom.
A handy, accurate tool, used to quickly mark trouser cuffs of
various lengths and widths.
| ITEM # |
LENGTH - WIDTH |
CALIBRATIONS |
| CR- 125 |
12" X 1-1/4" |
1/8”, 1/16” |
| CR- 150 |
12" X 1-1/2" |
1/8”, 1/16” |
| CR- 175 |
12" X 1-3/4 |
1/8”, 1/16” |
| CR- 200 |
12" X 2" |
1/8”, 1/16” |
| CR- 225 |
12" X 2-1/4" |
1/8”, 1/16” |
|
|
Click on photo
for larger view |
|
CENTER-FINDING RULERS
Calibrations are on two edges, on one side.
This rule is designed as an efficient aid in finding the
center between two points; a significant, time-saving device
in pattern-making, tailoring, forms design and crafts of all
kind. There is a zero-point at the center of the top edge of
the ruler, with equal incremental measurements to the left
and to the right, in 32nds of an inch. The bottom edge is a
standard ruler calibrated in 16ths.
| ITEM # |
LENGTH - WIDTH |
CALIBRATIONS |
| CF-006 |
6" X 3/4" |
1/16”. 1/32” |
| CF-012 |
12" X 1 3/4" |
1/16”. 1/32” |
| CF-018 |
18" X 1 3/4" |
1/16”. 1/32” |
| CF-024 |
24" X 1 3/4" |
1/16”. 1/32” |
| CF-036 |
36" X 1 3/4" |
1/16”. 1/32” |
| CF-048 |
48" X 1 3/4" |
1/16”. 1/32” |
|
|
Click on photo
for larger view |
|
AGATE - PICA RULERS
Calibrated on two
edges, on two sides.
Side One: Inches, in 16ths, on the top edge and
Picas on the bottom edge.
Side Two: Inches, in 16ths, on the top edge and
Agates on the bottom edge.
A precision tool, used in the layout of printed material.
| ITEM # |
LENGTH - WIDTH |
CALIBRATIONS |
| AP-012 |
12" X 1" |
1/16”, picas, agates |
| AP-018 |
18" X 1-1/2" |
1/16”, picas, agates |
| AP-024 |
24" X 1-1/2" |
1/16”, picas, agates |
TO TOP |
|
Click on photo
for larger view
Click on photo
for larger view |
|
|
